Epson RIP Station 5100, Administrator'S Manual, Page: 44 / 140

3
3-10 Performing Setup from the Control Panel
Network Setup options
Network Setup configures the RIP Station to receive print jobs over the network
systems that will be used at your site.
If the RIP Station is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print job. When the parallel port and
one or two network ports are enabled, print jobs can be received over all of those ports
at the same time.
In the Setup menu, choose Network Setup, where you specify network addresses and
names to be used by workstations, servers, and the RIP Station when they
communicate with each other.
The Network Setup menu includes three submenus that let you choose port types,
protocols, and network services. You must perform Port Setup and enable at least one
port.
For each item you enable, you are prompted to enter settings for that item. Default
values, where applicable, appear in square brackets.
You need to display and select options only for the network systems that are currently
used at your site. If your network requirements change, you can change Network
Setup at any time.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Exit Network Setup
Port Setup
Protocol Setup
Service Setup
Network Setup