manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 124 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 124

6

6-6

Administering the RIP Station

Enter First Letters
of Server Name
(Network Setup>Service 
Setup>PServer Setup>Bindery 
Setup)

File server name not found. 
Try again?

No file server with those letters was found when 
RIP Station queried the network. Check the name of the 
NetWare file server, check cable connections, and make 
sure the NetWare server is turned on.

View Server List,
Edit Connection 
(Network Setup>Service 
Setup>PServer Setup>Bindery 
Setup)

No file server is selected.

No file server has been added in Bindery Setup.

Add File Server
(Network Setup>Service 
Setup>PServer Setup>Bindery 
Setup)

All connections used.
Remove server?

You have added the maximum number of bindery servers, 
which is eight. You now have the option of disconnecting 
one of those servers, so as to add another.

Add Server, Enter Your Login 
Name, Enter Your File Server 
Password
(Network Setup>Service 
Setup>PServer Setup>Bindery 
Setup)

No NetWare print
server found.

No print server was found when RIP Station queried the 
file server you selected.
You must configure a print server and a print queue for 
every NetWare file server that will handle RIP Station print 
jobs (see page 5-4).

Any Bindery Setup screen

Novell error code, followed by 
a message.

Novell NetWare has reported an error. The Control Panel 
reports the error number and displays a brief message. 
For the most common errors (listed on page 6-8), a screen 
is displayed that enables you to retry the action that evoked 
the error, such as adding a server. If that is not possible, you 
are prompted to notify the Novell administrator, who will 
need to troubleshoot the network.
Consult NetWare Administrator documentation for 
further explanation of Novell error codes.

After this Setup screen:

This message:

Means:

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments