Epson RIP Station 5100, Administrator'S Manual, Page: 34 / 140

2
2-6 Preparing for RIP Station Setup
III. An administrator and an operator
Only an administrator can perform Setup and other administrator functions, and only
an operator or administrator can perform calibration and control jobs from a remote
workstation. Users can print to all RIP Station print connections.
IV. An administrator and an operator, no Fiery WebTool access
The administrator performs Setup, performs calibration, and controls jobs from a
remote workstation; users can print to the Hold queue and the Print queue, but not to
the Direct connection; the operator controls all job flow, but jobs sent to the Print
queue may not require intervention; no access to Fiery WebTools.
V. (Strictest control) An administrator and an operator, no Fiery WebTool access, operator
controls all jobs
The administrator performs Setup, and only an operator or administrator can perform
calibration and control jobs from a remote workstation; users can print only to the
Hold queue; the administrator and the operator have complete control of job flow; no
access to Fiery WebTools.
Use these settings
in Setup:
I
(Least)
II III IV V
(Strictest)
Enable Direct connection
√ √ √
Enable Print queue
√ √ √ √
Enable Web Services
√ √ √
Set an Administrator Password
(strongly recommended)
√ √ √ √
Set an Operator password
√ √ √