manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 62 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 62

3

3-28

Performing Setup from the Control Panel

The Bindery Setup menu is displayed again. You can edit other connections, choose 
another Bindery Setup option, or choose Exit Bindery Setup.

You can choose another Bindery Setup option (such as adding another file server) or 
choose 

Exit Bindery Setup

 and proceed to set the polling interval.

Network Setup

Service Setup

PServer Setup

Bindery Setup

Remove File Server 

Remove support for
File server name

This option allows you to select a NetWare file server from a list of connected file 
servers and remove the connection to it. You are notified that you have removed the 
connection, and the Bindery Setup menu is displayed again. If you change your mind 
and don’t want to remove any of the file servers, press the Menu button.

Network Setup

Service Setup

PServer Setup

Bindery Setup

Exit Bindery Setup

Choose 

Exit Bindery Setup

 after you have viewed a list of IPX file servers, removed a 

file server from the list or connected all the configured NetWare file servers. After you 
select 

Exit Bindery Setup

, you return to the PServer Setup menu.

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments