manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 36 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 36

3

3-2

Performing Setup from the Control Panel

RIP Station Setup from the Control Panel

Setup performed from the Control Panel right after powering on or rebooting the 
RIP Station configures the RIP Station to communicate with other devices and 
manage print jobs sent to it. 

There are six groups of Setup options:

• Server Setup to specify system options

• Network Setup to specify all the active network systems that will transmit print jobs 

to the RIP Station

• Printer Setup to specify the way print jobs and queues are managed

• PS Setup to specify PostScript settings

• Color Setup to specify color settings

• Job Log Setup to specify how the RIP Station handles its log of printed jobs

Other Setup options allow you to create and change an Administrator password and to 
clear the jobs queued on the RIP Station.

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments