Epson RIP Station 5100, Administrator'S Manual, Page: 96 / 140

4
4-18 Using Fiery WebSetup
Service Setup (Windows Printing Service)
For setting up the Windows printing service, these characters are allowed in the text
fields: uppercase letters, numerals, space, and the following characters:
- _ . ~ ! @ # $ % ^ & ( ) { } \ ' , "
N
OTE
:
Lowercase letters are not allowed, except in the Comment field.
Enable Windows Printing Service
—Select to enable SMB (Server Message Block), the
file and printer sharing protocol built into Windows. Enabling SMB allows the
RIP Station to be listed on the network so that Windows clients can print to a
particular print connection (Hold, Print, or Direct) on the RIP Station without any
other networking software. For information on how to set up a Windows client for
Windows printing, see the Setup Guide.
N
OTE
:
Windows (SMB) printing runs over TCP/IP, so TCP/IP must be configured on
all the RIP Station and on workstations that use Windows printing.
Server Name
—The server name is the name that will appear on the network. It can,
but does not have to, be the same name as the server name assigned in Server Setup
(see page 3-8 and page 4-3).
Comment
—Server comments (optional) can contain information about the printer.
These comments are listed in the Properties of the RIP Station in Network
Neighborhood. Comments can be up to 15 characters long. Lowercase letters are
allowed in this field.
Domain or Workgroup
—Enter the workgroup or domain you want the RIP Station to
appear in.
Auto IP
—If you have already enabled IP Auto in Protocol Setup, and selected either
DHCP or BOOTP as the protocol for obtaining an IP address, check this option to
allow the RIP Station to obtain the IP address automatically for the WINS Name
Server. If you do not check this option, you can use the following two options to
specify whether to use a WINS Name Server and what its IP address is.
Use WINS Server
—Select to use a WINS name server. Broadcasts from SMB devices
cannot be routed beyond their original network segment without a WINS name
server. Setting up the WINS name server is outside the scope of this manual. To find
out if a name server is available, contact your network administrator.
IP Address
—Enter the IP address of the WINS Name Server.