manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 12 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 12

 

xii

Introduction

 

This manual is organized as follows:

• Chapter 1 illustrates the supported network configurations and shows the network 

connectors on the RIP Station. 

• Chapter 2 describes how to prepare for RIP Station Setup, including planning a 

security system with access levels.

• Chapter 3 describes RIP Station configuration (Setup) from the Control Panel.

• Chapter 4 describes RIP Station configuration (Setup) from Fiery WebSetup.

• Chapter 5 provides guidelines for setting up Windows network servers and UNIX 

systems for printing to the RIP Station.

• Chapter 6 summarizes some administrative features of RIP Station software that are 

available for IPX/SPX, TCP/IP, and AppleTalk networks, and also offers some 
troubleshooting hints.

 

N

 

OTE

 

:

 

Administrator features described in other manuals are summarized on page 6-1.

 

About the documentation

 

This manual is part of a set of RIP Station documentation, which includes the 
following manuals for users and system administrators:

• The 

 

Administrator Guide 

 

explains basic configuration and administration of the 

RIP Station for the supported platforms and network environments. It also includes 
guidelines for setting up UNIX, Windows NT 4.0, and Novell NetWare servers to 
provide PostScript printing services to clients.

•

 

Setup Guide 

 

describes how to install software to enable users to print to the 

RIP Station. Specifically, it describes installation of PostScript printer drivers, printer 
description files, and other user software provided on the User Software CD. It also 
explains how to connect each user to the network.

• The 

 

Color Guide

 

 provides information on managing the color output of your 

RIP Station. It addresses concepts and issues associated with printing to the 
RIP Station and outlines key workflow scenarios. This manual explains how to 
calibrate your printer and take advantage of the ColorWise

 

®

 

 color management 

system as well as features in ColorWise Pro Tools

 

™

 

. In addition, the 

 

Color Guide

 

 

offers information on printing from popular Windows and Mac OS applications.

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments