manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 51 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 51

3

3-17

Network Setup options

Gateway

If your TCP/IP network has a gateway, and users outside the gateway print to the 
RIP Station using TCP/IP, choose Gateway Setup and enter the gateway address.

Network Setup

Protocol Setup

TCP/IP Setup

Gateway Setup

Get Gateway Address Automatically
Yes/No [No]

Use this option to get the gateway address automatically for printing with TCP/IP. 
This option appears only if you selected DHCP or BOOTP as the protocol (see 
page 3-16).

If you select the DHCP or BOOTP protocol and later change it to RARP, you must 
return to Gateway Setup and set 

Get Gateway Address Automatically

 to No. You can 

then set the address manually. This is because RARP does not support automatic 
assignment of the gateway address.

Gateway Address
[127.0.0.1]

This option appears only if you answered No to 

Get Gateway Address Automatically

, or 

if you selected RARP as the protocol. 

Use this option to set the gateway address for printing with TCP/IP. If your network 
uses a gateway, you must change the default 

127.0.0.1

 to a correct gateway address for 

your network.

After setting the gateway address, choose Exit TCP/IP Setup and proceed to Service 
Setup.

Exit TCP/IP Setup
Ethernet Setup
Gateway Setup

TCP/IP Setup

 

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments