manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 111 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 111

5

5-11

RIP Station on a TCP/IP network with Windows NT 4.0

Installing the RIP Station as a shared PostScript printer

The first step in creating a printer is installing the AdobePS PostScript printer driver 
and the RIP Station PPD (PostScript printer description), which gives your 
applications access to printer features. The installation instructions in the Setup Guide 
can be used for every workstation that will print directly and independently to the 
RIP Station. However, if you are an administrator running Windows NT 4.0 Server or 
Windows NT 4.0 Workstation, you can also create a printer and share it with 
Windows NT 4.0 clients on the network. When a printer is shared, Windows NT 4.0 
clients who are not able or are not given permission to establish an independent 
network connection to the RIP Station can still print through the server.

You can specify sharing of the printer during installation of the RIP Station printer 
files. If you have not yet installed the RIP Station printer files on the Windows NT 4.0 
print server computer, do so now following the instructions in the Setup Guide. During 
installation, enter the information necessary to share the RIP Station.

If you have already installed the RIP Station printer files on the computer you are 
using as an NT 4.0 print server, see your Windows documentation for information 
about sharing the RIP Station.

If more than one RIP Station print connection is published (for example, if both the 
Print queue and the Hold queue are published), you may wish to create a printer for 
each print connection so that you and other users can print to each connection 
directly. When prompted to specify the printer name, enter a name that indicates the 
RIP Station print connection.

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments