Epson PowerLite 735c, User Manual

Page: 14 / 144

8
Displaying and Adjusting the Image
Positioning the Projector
If you’re setting up the projector yourself
and it isn’t already installed in the theater
or conference room you’re using, you’ll
probably want to place it on a table in
front of the screen, as shown.
x art below
This lets you stand in the front of the room, face the audience, and
remain close enough to the equipment to be able to control it. Try to
leave as much space as possible between the projector and the screen to
get a good-size image.
Use the figure below to help you determine placement. Image size
increases with distance, but can vary depending on how you position
the zoom ring and whether you’ve adjusted the image with other
settings.
Also keep these considerations in mind:
■
Place the projector on a sturdy, level surface.
■
Make sure there is plenty of space for ventilation around and
under the projector. Do not set the projector on top of loose
papers that could block the vents under the projector.
■
Make sure the projector is within 10 feet of a grounded electrical
outlet or extension cord.
note
You can mount the projector
on the ceiling, or place it
behind a translucent screen
for rear projection. See
page 117 for details.
3 to 4 ft 6.5 to 7.5 ft 33 to 38.5 ft distance from screen