Epson PowerLite 735c, User Manual

Page: 101 / 144

Maintaining the Projector
95
Cleaning and Replacing the Air Filter
Clean the air filter on the side of the projector after every 100 hours of
use. If it is not cleaned periodically, it can become clogged with dust,
preventing proper ventilation. This can cause overheating and damage
the projector. To clean the air filter, follow these steps:
1. Turn off the projector, allow it to cool down, and unplug the
power cord.
2. To clean the filter, EPSON recommends using a small vacuum
cleaner designed for computers and other office equipment. If you
don’t have one, gently clean the filter using a very soft brush (such
as an artist’s camel-hair brush).
3. If the dirt is difficult to remove or if the filter is broken, replace it.
Contact your dealer or call EPSON at (800) 873-7766 in the
United States to obtain a new one. In Canada, please call
(800) 463-7766 for dealer referral.
To remove the filter, lift up the tab as shown below to release it.
note
When you get a replacement
lamp for your projector, a
new air filter is included.
You should replace the filter
when you replace the lamp.