Epson PowerLite 735c, User Manual

Page: 39 / 144

Presenting Through a Wireless Network
33
4. Click the
Advanced
tab. You see a screen similar to this:
5. Check your network card’s device settings. (Depending on the
type of card or wireless transmitter you’re using, some of the
settings may be described differently from those listed here.)
■
Set the network type to
802.11 Ad Hoc
.
■
Set the SSID to match the name you assigned to the
projector’s ESSID—for example,
CONF ROOM
. (If your
network card uses channel mode instead, set the correct
channel, 1 to 11, so it matches that of the projector.)
■
Make sure encryption is
Disabled
.
6. Click the
General
tab and make sure that the network card or
wireless network device is enabled.
7. When done making the settings, click
OK
to close the network
card’s properties dialog box.
Now you’re ready to connect to the projector. See “Running NS
Connection” on page 42.