Epson PLQ-30 User Manual Download Page 82

Page: 82 / 139

❏

If you are using a USB hub, connect the printer to the first tier of the hub, or connect the printer
directly to the computer’s USB port.

Clearing a Paper Jam

If paper is not automatically ejected in the situations noted below, a paper jam may have occurred
inside the printer.

❏

The printer is turned on.

❏

Press the

F1/Eject

button in EPSON Mode.

❏

Press the

Offline

button and then the

F1/Eject

button in IBM4722 mode.

Follow the steps noted below to clear the paper jam.

Warning:

If you have just used the printer, the print head may be hot; let it cool for a few minutes before
touching it.

Caution:

Do not touch the white cable inside the printer.

1. Turn off the printer.

Caution:

Whenever you turn off the printer, wait at least five seconds before turning it back on;
otherwise you may damage the printer.

PLQ-30/PLQ-30M User’s Guide

Troubleshooting

Summary of Contents for PLQ-30












































































































































Search results

Summary of Contents for PLQ-30

Reviews:

Related manuals for PLQ-30

Brands by name

Popular brands

Epson PLQ-30, User Manual

Search results

Summary of Contents for PLQ-30

Reviews:

Related manuals for PLQ-30

Brands by name

Popular brands