Note:
❏
Your printing start position setting remains in effect until you change it, even if you turn off the
printer.
❏
Prepare an A4 size sheet of paper before using this function.
❏
Always close the printer cover before printing. The printer does not print when the printer cover is
open.
1. Select the Target Printer Mode which corresponds to the emulation you wish to change setting.
See “About Your Printer’s Default Settings” on page 54.
2. Turn off the printer.
!
Caution:
Whenever you turn off the printer, wait at least five seconds before turning it back on;
otherwise you may damage the printer.
3. Turn on the printer while holding the
Offline
and
F2
button.
4. Press the
F2
button while the
Offline
light is flashing.
5. When the
Ready
light turns on, insert a sheet of A4 paper into the front slot. The printer prints the
guide to adjust the printing start position and position patterns.
6. Press the
F1/Eject
button for the next pattern or
F2
button for the previous pattern to select the
printing start position. Each time you press the
F1/Eject
or
F2
button, the printer makes a short
beep. The
F1/Eject
,
Offline
and
F2
lights show the pattern which is selected at that time.
7. After you select the printing start position, turn off the printer. The setting does not change even if
the printer is turned off.
PLQ-30/PLQ-30M User’s Guide
Paper Handling
22
