Epson PLQ-30 User Manual Download Page 37

Page: 37 / 139

5. Click

Set

. The adjustment pattern will be stored in the printer.

Using Printer Setting

This utility tool allows you to display current settings stored in the printer, change settings of the
printer, and read settings stored in the file or save settings to the file.

Caution:

❏

Do not turn off Packet Mode setting.

❏

Network connection is not supported.

❏

Make sure that the printer’s status is ready before getting setting from the printer or updating
the printer settings.

Changing printer setting

To change printer settings, follow the steps below.

1. Open the

Utility

menu, then click the

Printer Setting

icon. To find out how to open the Utility

menu, see “Using the Printer Driver” on page 23. The Printer Setting windows appears.

2. Change the necessary printer settings. For details on how to use this tool, refer to the printer driver

Help.

PLQ-30/PLQ-30M User’s Guide

Printer Software

Summary of Contents for PLQ-30












































































































































Search results

Summary of Contents for PLQ-30

Reviews:

Related manuals for PLQ-30

Brands by name

Popular brands

Epson PLQ-30, User Manual

Search results

Summary of Contents for PLQ-30

Reviews:

Related manuals for PLQ-30

Brands by name

Popular brands