Broken pin number
Select the pin number of the broken pin. The broken pin number is shown on the sheet of current
default settings that can be printed in the default setting mode. The gap on the sloping line above the
pin numbers shows the broken pin number.
Roll Paper
When you use roll paper with the optional roll paper holder, set this option to
On
. This mode is
activated when you select
On
and the
Passbook
and
Rear Paper Guide
mode is set to
Off
.
When this option is set to
Off
and paper is left in the printer, the printer ejects the paper when the
printer is turned on or the cover is opened. When this option is set to
On
, the printer does not eject the
paper.
Rear Paper Guide
When you use the optional rear paper guide, set this option to
On
.
Copy mode
This setting allows you to set copying capabilities. When
On
is selected, you can use multipart forms
with one original and up to six copies. When
Off
is selected, you can use multipart forms with one
original and up to two copies. Printing speed is reduced when
On
is selected.
Magnetic standard
You can select the magnetic standard in this setting.
This feature is available only for PLQ-30M.
End sentinel
You can select
C
or
F
as the letter which will be attached to the end of the data recorded on magnetic
stripes.
This setting is effective only when the format for
IBM3604
or
IBM4746
is selected in the
Magnetic
standard
setting.
This feature is available only for PLQ-30M.
Displacement
This option allows you to select the displacement value of the magnetic stripe.
PLQ-30/PLQ-30M User’s Guide
Control Panel
58
