Auto line feed
When auto line feed is set to
On
, the printer accompanies each carriage return (CR) code received with
a line feed (LF) code.
Auto CR (IBM PPDS)
When auto carriage return is set to
On
, each line feed (LF) code or ESC J code is accompanied by a
carriage return (CR) code so the printer moves the next printing start position to the left margin.
When this setting is set to
Off
, you must send a CR code after the line feed code to move the printing
start position to the left margin.
This feature is only available in IBM PPDS emulation mode.
A.G.M. (IBM PPDS)
When the alternate graphic mode (A.G.M.) is set to
On
, the ESC 3, ESC A, ESC J, ESC K, ESC L, ESC Y,
ESC Z, and ESC * commands in IBM PPDS emulation mode work the same way as in ESC/P2 or
ESC/P2+ESC/MC mode.
This feature is only available in IBM PPDS emulation mode.
IBM character table (IBM PPDS)
Select
Table2
or
Table1
for the IBM character table.
This feature is only available in IBM PPDS emulation mode.
Columns
You can select the number of columns in one line.
Paper loading
When you set
Auto Load
, the printer loads paper just after it is inserted. When you set
Data Exists
,
the printer does not load the paper until it receives the data.
Changing default settings
The following table shows the basic function of each button in the default setting mode.
PLQ-30/PLQ-30M User’s Guide
Control Panel
68
