Replacing the Photo Cartridge
35
6.
Set the cartridge lock lever in the
Release
position by sliding the lever to the right, then
down and to the left. The photo cartridge will be
ejected about halfway out of the holder. Pull the
cartridge out of PictureMate and dispose of it
properly.
Note:
❏
Do not take the used cartridge apart or try to refill
it. Do not shake the used photo cartridge;
otherwise, it may leak.
❏
The photo cartridge must be replaced when any
one of the colors is depleted. The rate that a specific
color of ink is consumed depends on the images
printed.
7.
Remove the replacement photo cartridge from its
package.
c
Caution:
❏
Do not touch the green IC chip on the
bottom of the cartridge. This can damage
the photo cartridge.
❏
If you remove the photo cartridge for later
use, be sure to protect the ink supply ports
from dirt and dust; store it in the same
environment as the printer. Note that
there is a valve in the ink supply ports,
making covers or plugs unnecessary, but
care is needed to prevent the ink from
staining items that the cartridge touches.
Do not touch the ink supply ports or
surrounding area.
❏
Be sure to always install a photo cartridge
into the printer immediately following the
removal of the current photo cartridge. If
a photo cartridge is not installed promptly,
the print head may dry out, rendering it
unable to print.
Do not touch this part.
Summary of Contents for PictureMate 100
Page 6: ...vi ...
