
36
Replacing the Photo Cartridge
8.
Place the cartridge properly into the cartridge
holder, then push it in until you feel resistance
and hear the cartridge faintly click into place.
Note:
After installing the cartridge, make sure the sides of the
cartridge are even. If either side of the cartridge sticks
out, push the side of the cartridge until it clicks.
9.
Set the lever to the
Lock
position by sliding it in
the direction shown.
10. Close the cartridge compartment cover.
Note:
If you cannot close the cartridge compartment cover, the
photo cartridge is not installed correctly. Go back to the Step
6 and eject the photo cartridge. Then install the photo
cartridge again.
11. Move the handle all the way down.
Summary of Contents for PictureMate 100
Page 6: ...vi ...