You cannot scan negative slides.
Make sure the white stickers on the back on the film holder and the areas around them are not
scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble
recognizing your slides in Full Auto Mode.
Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing
which film holder you are using.
Place up to twelve slides in the 35 mm slide holder with the shiny base side facing down. Your image should appear
backwards on the side that faces up, as shown by the illustration on the film holder. The top of your images should
face the open end of the film holder as shown below.
Place the film holder on the document table so that it is aligned with the upper right corner.
