a. transparency unit window
To place film for scanning, see
To place slides for scanning, see
Placing Film in the Holder
Placing 35 mm Film Strips
Remove the film strip cover(s) on the film holder.
Slide up to four film strips all the way into the film holder with the shiny base side facing down. Your images and
any wording on the film strips should appear backwards on the side that faces up, as shown by the illustration on
the film holder.
Note:
Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the
film.
Make sure the white stickers on the back of the film holder and the areas around them are not
scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble
recognizing your film in Full Auto Mode.
Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing
which film holder you are using.
Place the cover(s) over the film and press them down until they click. Then press down on all the edges of the
covers to secure them.