Slide up to two medium format film images into the film holder with the shiny base side facing down. Your images
and any wording on the film should appear backwards on the side that faces up, as shown by the illustration on the
film holder. Make sure the entire image frame is positioned in the film holder opening.
Note:
Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the
film.
Make sure the white stickers on the back of the film holder and the areas around them are not
scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble
recognizing your film in Full Auto Mode.
Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing
which film holder you are using.
Close the cover over the film and press it down until it clicks. Then press down on all the edges of the cover to
secure it.
Place the film holder on the document table so that it is aligned with the upper right corner.
