Epson Fast T-Jet 3 PLUS, User Manual

Page: 75 / 135

65
Chapter 6
Printing on Other Items
Printing on General Items
The T-Jet3 PLUS can print
on almost any fabric
or material and usually
you don’t even need a
clamping device. FastINK
for your T-Jet3 PLUS is a
water-based textile ink
designed to work not only
on natural fabric materials,
but also on non-textile items
such as un fi nished wood,
mouse pads, golf balls,
keyboards, light switch
covers and much more. With the help of Fast T-Jet Non-Textile Series Pre and
Post Treatments, FastINK will adhere to almost any type of surface.
If you’re printing on smaller items such as hats, golf balls or mouse pads, these
can be placed on smaller Garment Holders available as accessories for your
T-Jet3 PLUS or you can make your own. Spray adhesive or sticky Table Tack
can be placed on these special holders to keep the items from moving. Just
remember to ALWAYS check the Print Head clearance.
Shirtboards (available options)
Location and Placement
The hardest part of printing on odd size items is determining their print location.
If you are facing your T-Jet3 PLUS, the outer right edge is “zero” in your graphics
nn GGeenneerraall IItteem mss
LU LUS S ca can n pr prin intt
nny y fa fabr bric ic
Youth / Infant Standard Sleeve Quad