Epson Fast T-Jet 3 PLUS, User Manual, Page: 55 / 135

Chapter 4 - Printing Basics
45
Prepare Your Artwork for Printing
Create or choose the artwork to print from within your favorite graphics 1.
application (FastARTIST preferred).
Make sure the image is the correct •
physical size and that you have placed
it in your graphics program on a Page
that is the same size as the Shirtboard you
will be using.
The easiest way to get the correct print •
placement is to work on a 13” x
18” (33 x 45.7cm) Page as your layout. If you
need to print an image that
is wider than 13” (33cm), you can rotate
the image in your graphics program and load the shirt
sideways onto the Shirtboard (90º clockwise).
When working within FastARTIST, select the • Page Size from the Layout >
Page Size window. You will also use this template when importing images.
You must also set the Page Size within FastRIP. Within FastARTIST, go to
File > FastRIP Setup and select the applicable value.
Select the appropriate Print 2.
Mode. There are a wide variety of Print Modes in the FastRIP software. Print
Modes give you the advantage of printing higher quality images (slower
speed) when needed or to print low quality simple Spot Color images (faster
speed) when needed.
You are now ready to print! Select the 3. Print command from your graphics
application and choose T-Jet3 PLUS as your printer.
22
Mo Mode de Th Ther ere e ar are e a a wi wide de vvar arie iety ty o off Pr Prin intt M M
Se Sele lect ct tthe he a app ppro ropr pria iate te PPrirint nt 22