Epson Fast T-Jet 3 PLUS User Manual Download Page 48

Page: 48 / 135

T-Jet3 PLUS User’s Manual

Version 1.1 Revised July, 2008

The T-Jet3 PLUS is a highly modi

ed versions of the Epson R1800 with hundreds

of additional parts not provided by Epson. As a result, your T-Jet and any driver

software is NOT supported by Epson. All support for the Epson driver and internal

Epson components will come from

If you have any concerns installing the driver, contact our Support Department

and they will gladly walk you through the process.

Disabling the Status Monitor

For optimal Fast T-Jet3 performance you will need to ensure no Epson monitoring

services are running. To turn this service off, please perform the following

procedures after installing the Epson R1800 printer drivers and connecting the

USB cable to the PC.

Locate your task bar and or a small printer icon.

Right-click

on the printer icon and select

Monitoring Preferences

. In the dialogue

box that appears, uncheck everything in

this window.

You will now no longer see the printer icon

within the taskbar. The

Status Monitor

has

been disabled.

Summary of Contents for Fast T-Jet 3 PLUS








































































































































Search results

Summary of Contents for Fast T-Jet 3 PLUS

Reviews:

Related manuals for Fast T-Jet 3 PLUS

Brands by name

Popular brands

Epson Fast T-Jet 3 PLUS, User Manual

Search results

Summary of Contents for Fast T-Jet 3 PLUS

Reviews:

Related manuals for Fast T-Jet 3 PLUS

Brands by name

Popular brands