Epson Fast T-Jet 3 PLUS, User Manual

Page: 61 / 135

Chapter 4 - Printing Basics
51
The arrows in this second example show
that the background is set to RGB
255,255,255, making the background
transparent when printing with FastRIP.
Color Management must be turned OFF
before sending the image to print. Color
Management is found in the Print with
Preview window. Go to File > Print with
Preview . For more information and
instructions on how to Print from
Photoshop, refer to Chapter 9 of your
FastARTIST User’s Manual.
Printing from CorelDRAW – Design Setup
When designing in CorelDRAW, set areas where no Underbase is desired as pure
White (RGB 255,255,255 or CMYK 0,0,0,0). To print an area as White, set the area
to a slight tint of off-White (RGB 254,254,254 or CMYK 1,1,1,1).
In this fi rst example, the selected area
is set to CMYK 1,1,1,1, which is
recognized as White and will receive
an Underbase when printed through
FastRIP.
When working with vector images, if you use Named Spot Colors, use the Spot
Color White and FastRIP will create a Highlight White when it prints the Top Color