Chapter 7 - Utilities to Improve Print Quality
87
The Waste Ink Pad Counter window will still
6.
be present. Click on the
Initialization
button
as shown on the right.
Another Information pop-up will appear, indicating that the Waste Ink
7.
Counter has initialized properly. Click on
OK
.
Click on the
8.
Read
button once more to record the initial value of 1777.
When the Information pop-up appears, click on
9.
OK
.
Select
10.
Finish
from the bottom of the Waste Ink Pad Counter window and exit
the Adjustment program.
Turn OFF your Fast T-Jet3 PLUS by using the
11.
Power
button and
Power switch, located on the rear of your printer adjacent the
power cord.
Manually center the Print Bed by applying a light pressure against it with your
12.
hand.
The
fi
nal step is a Manual Reset of your printer. This will complete the Waste
13.
Tank Reset process.
While holding down the Power button,
fl
ip the Power switch.
▪
The Print Bed will begin to move back and forth. Don’t interfere with its
▪
movement, this is part of the reset process.
Allow the Print Bed to move back and forth at least 2 times, then turn OFF
▪
the printer using the Power switch.
Summary of Contents for Fast T-Jet 3 PLUS
