42
Chapter2 Setup
Setup without using Install Navi
How to Get the Software
You can get the software from the following website.
For customers in North America, go to the following web site:
www.epson.com/support/
For customers in other countries, go to the following web site:
How to Connect to a Computer
Connect the interface cable to be used to the connector on the back of the printer.
How to Configure the Network Settings
Follow the procedure below to set up the IP address of the printer.
1
Turn the printer on.
2
Select [Menu] and then press the [OK] button.
3
Select [General Settings] and then press the [OK] button.
4
Select [Network Settings] and then press the [OK] button.
5
Select [Advanced] and then press the [OK] button.
6
Select [TCP/IP] and then press the [OK] button.
7
Select [Obtain IP Address] and then select [Auto] or [Manual] using the [OK] button.
When you select [Auto], the network setting is complete.
When you select [Manual], proceed to step 8.
When connecting with a USB cable, pass the cable through the wire
saddle to prevent accidental disconnection.
•
To connect to the printer via Ethernet, the network settings are required. When connecting to the
printer via USB, the network settings are not required.
•
Before starting the network settings, ask your network administrator for information required for the
network settings.
