manualshive.com logo in svg

Epson ColorWorks C6500Ae, Technical Reference Manual, Page: 136 / 250

Share
Download
Epson ColorWorks C6500Ae Technical Reference Manual Download Page 136

136

Chapter3 Handling

Replace settings from printer using ZPL II commands

1

Click [Set...] for [Replace settings from printer using ZPL II commands] to open the
setting window.

2

Set a resolution that is the same as that of the printer using ZPL II commands, and
select the check box for [Use in Monochrome Printing Mode]. Click [Apply settings].

3

A confirmation window appears. Click [Yes] to apply the settings.

4

The result is displayed. Click [OK].

If you click [Default settings], the default settings of the printer are applied on the window.
Then click [Apply settings] to apply the default settings.

For the [Font width] setting, check printouts and change it if needed.
For more information on replacing printer, see 

"Changing Printer Settings and Replacing Printer" 

on page 206

.

Summary of Contents for ColorWorks C6500Ae



























































































































































































































































Reviews:

No comments