manualshive.com logo in svg

Epson ColorWorks C6500Ae, Technical Reference Manual, Page: 214 / 250

Share
Download
Epson ColorWorks C6500Ae Technical Reference Manual Download Page 214

214

Appendix

Operating Environment

OS

Microsoft Windows 10 (32 bit/64 bit)

Microsoft Windows 8.1 (32 bit/64 bit)

Microsoft Windows 8 (32 bit/64 bit)

Microsoft Windows 7 SP1 (32 bit/64 bit)

Microsoft Windows Vista SP2 (32 bit/64 bit)

Microsoft Windows XP SP3 (32 bit)

Microsoft Windows Server 2019

Microsoft Windows Server 2016

Microsoft Windows Server 2012 R2

Microsoft Windows Server 2012

Microsoft Windows Server 2008 R2

Microsoft Windows Server 2008 (32 bit/64 bit)

Microsoft Windows Server 2003 R2 (32 bit)

Computer

The following computer that runs one of the above operating systems must be supported.

PC/AT compatible machine

CPU

A computer that has Pentium 4 2 GHz or higher processor is recommended.

Memory

1 GB or more is recommended.

HDD

At least 250 MB is required.

The above requirements may not satisfy the minimum system requirements of the supported operating 
systems. In that case, satisfy the minimum system requirements of the operating system.

Summary of Contents for ColorWorks C6500Ae



























































































































































































































































Reviews:

No comments