218
Appendix
Roll Die-cut Label (without Black Mark)
*1: If the gap is 3 mm or less, you need to adjust the detector.
Form
Roll paper
Backing paper width
25.4 to 215.9 mm
Label width
21.4 to 211.9 mm
Label length
When auto cut is not used: 8 to 609.6 mm (up to 24 inches)
When auto cut is used: 15 to 609.6 mm (up to 24 inches)
Gap between Labels
2 to 6 mm* 1
Waste part on the left and right
2
±
0.5 mm
Label corner R
1.5 mm or more
Paper thickness
Matte Paper: 0.178 mm
Synthetic: 0.229 mm
Glossy Paper: 0.174 mm
Glossy Film: 0.164mm
High Glossy Paper: 0.188mm
Roll paper core inner diameter
76.2 mm
±
0.5 mm
Roll paper outer diameter
152.4 mm or less
Winding direction
Print side must be facing outside (facing inside is unusable)
•
Paper with holes or cutouts cannot be used.
•
Set the cut position to a position at least 0.7 mm away from the black mark of the next label.
Waste part
Label length
Gap
betw
een Labels
Waste part
Backing paper
Label area
Backing paper width
Paper feed direction
G
a
p bet
w
een pages
Label width
Side edge baseline
Cut position