Home
/
Epson
/
ColorWorks C6500Ae
/
Technical Reference Manual

Epson ColorWorks C6500Ae, Technical Reference Manual, Page: 112 / 250

Share

Page: 112 / 250

Epson ColorWorks C6500Ae Technical Reference Manual Download Page 112

112

Chapter3 Handling

Restrictions on Using the Printer Driver

•

Keep the Bidirectional Printing function enabled. It can be set in [Advanced] that is a sub menu of [Print
Quality] in [Media Settings].

•

The printer driver does not support printing a background image.

•

To print multiple print jobs in time order, disable [Print spooled document first]. If the printer driver
receives multiple print jobs with [Print spooled document first] enabled, the print jobs may not be printed in
time order.

•

When using Epson printer driver, do not change the control prefix, the format prefix, and the delimiter string
that are included in ESC/Label command from their defaults. If you change them, printing will not be per-
formed or result in producing unintended printouts.
For their default settings, see

"Operation Panel Settings" on page 145

and find [Printer Settings] - [Print Set-

tings] - [Command Character].

«
...
110
111
112
113
114
...
»

Summary of Contents for ColorWorks C6500Ae



























































































































































































































































Reviews:

No comments