Troubleshooting and Diagnostics
5-4
During normal operation the following error messages may occur:
Display
That means...
Cause / Action
AGC ERROR
AGC ADJUST
- Distance print head and
procedure fault
platen faulty
- Print head loose
- Platen incorrectly installed
- Ribbon not inserted
- Horizontal drive without
function
- Platen got dirty
BUFFER OVERFLOW
Handshake protocol - Check CTR - CTS or
error
XON - XOFF protocol
- Repeat data transfer
COVER OPEN
Displayed when the - Close cover
top cover is open
and the printer is in
the
READY
or
BUSY
mode.
FRAMING ERROR
Protocol error
- Check protocol setting of
printer and host
- Repeat data transfer
HOR. DRIVE ERROR
Horizontal drive
- Horizontal drive blocked
without function
- Paper jam
- Distance of platen gap too
narrow
- AGC procedure on not
workable position
- Platen incorrectly installed
- No AGC ADJUST after
print head or platen
replacement
- Device electronic fault
- Encoder strip missing
- Horizontal drive fault
Summary of Contents for C I - 4 0 4
