Disassembly and Assembly
Laser
Service Manual
3.2.3.3 Heater Lamp Removal
■
Do not touch the glass
of the lamp with your bare
hands.
replace the heater lamp, terminal of the heater lamp that indicated the voltage
side set to the support plate side.
1.
Remove the fusing unit. (Refer to Section 3.23.2.)
2. Remove
CC screw
x 8) for the heater lamp support plate, and remove it.
3. Remove the heater lamp.
Figure 3-7. Removing the Heater Lamp
3.2.3.4 Power Supply Unit
Removal
1. Remove the housing. (Refer to Section
2. Remove the rear frame. (Refer to Section
3. Disconnect connectors
and
power
4.
2 CC
x 6) and 3
screws
x 6),
and remove the power supply
..-’
Figure 3-8. Removing the Power Supply Unit
Rev.
