/Action Laser 1300 Service Manual
Disassembly and Assembly
3.1 GENERAL INFORMATION
This chapter describes the disassembly/assembly procedures to be used for replacing the main
assemblies of the
and ActionLaser 1300.
3.1.1 Precautions for Disassembly/Assembly
Follow the precautions below when disassembling/assembling the printer.
■
Disconnect the power cord before
■
Be sure handle the
unit
because the unit is still hot for awhile
the printer stops printing.
■
If it is
to plug in the power cord and operate the printer
disassembling
it, please be
of the following:
Keep your hands and clothing well
operating or rotating parts (such as
rollers, fan motors, etc.).
Never touch electric terminals or high-voltage components (such as the charger and
the high-voltage unit).
Do not disassemble the imaging cartridge.
■
If the imaging cartridge is
the printer, do not place it in the direct
sunlight.
Do not disassemble the optical unit.
Never turn power on if the optical unit is not installed.
■
To prevent damage to
static electricity, do not touch the
on the circuit
board or the terminals of peripheral electrical components with your hands.
Use only the recommended tools to ensure safe and
maintenance work.
Inappropriate tools may damage the machine.
■
Never open the upper unit until the main motor stops completely.
the gears
may be damaged.
■
When transporting the printer, remove the imaging
the printer.
■
When transporting the printer a long distance, box the printer using the original packing
material.
3.1.2
Use the tools listed in Table 3-1 for disassernbly/assembly and troubleshooting.
Table 3-1. Tools
Name
Commercially Available?
Part No.
Phillips screwdriver No. 2
Yes
B743800200
Regular screwdriver
Yes
B743OOO1OO
Tweezers
Yes
B841 000100
Soldering iron
Yes
B740200100
Round-nose pliers
Yes
6740400100
Rev.
