![background image](http://html.mh-extra.com/html/epson/actionlaser-1300/actionlaser-1300_service-manual_108554088.webp)
Maintenance
Service
4.
Set the imaging cartridge on a clean, flat surface. Firmly grip the tab on the left side of
cartridge. Pull the clear seal all the way out with
even pressure, as shown.
Figure 6-2. Removing the Clear Seal
5. Shake the imaging cartridge again.
6. Insert the imaging cartridge into the printer by placing the pins on each side of the cartridge
into the grooves inside the printer. Slide it gently into the opening until it stops.
7. Push down on the front of the cartridge until it locks in place
Figure
6-3.
Imaging Cartridge Settings -1
8. Close the upper unit.
Figure 6-4.
Settings -
9. If the printer displays toner low message, hold down the Continue button together with the
Toner Save Mode button until the Status Sheet light begins blinking green and orange.
6-2
Rev.