![background image](http://html.mh-extra.com/html/epson/actionlaser-1300/actionlaser-1300_service-manual_108554068.webp)
Disassemble and
Service Manual
3.2 DISASSEMBLY AND ASSEMBLY
This section describes and illustrates the procedures
removing and disassembling the
components of the
and ActionLaser 1300. Cleaning is described in Chapter 6.
assembly procedures are not described, except
special notes where necessary, because assembly
can be accomplished by performing disassembly in reverse.
3.2.1 Housing Removal
This section describes how to remove the cases and the rear frame.
3.2.1.1
Removal
1.
2.
3.
4.
5.
6.
7.
8.
Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it
from the light or place it in a dark area.
Remove the CC screw
x 8) and panel cover.
Remove the paper tray.
Remove 2 CC screws
x 8) and the front cover.
Remove
cover.
Remove 2 CC screws
x 8) and right cover.
Remove 2 CC screws
x 8) and left cover.
Remove the top cover.
\
Interface Cover
/
Left Cover
Front Cover
Figure 3-1. Removing the Housing
Tray
Rev.