/Action Laser 1300 Service Manual
Operating Principles
Figure 2-25 shows the print process, and Figure 2-26 shows the start print sequence. The printer’s
engine starts printing when the PRINT signal is received from the video controller board.
Brush Charging
Laser
PC Drum
Exposure
Development
Transfer
Figure 2-25. Print Process
Main Motor On
[sec.]
Laser
Exposure
Development
Image
Transfer
Paper Take-up
Solenoid
Paper Take-up Sensor On
Figure 2-26. Print Sequence (Start)
Figure 2-27 shows the end of the print sequence. The printer stops the main motor (Ml) from
rotating when the paper exit sensor turns off after
4.72
seconds.
[sec.]
Drum
Charge
Laser
Exposure
Image
:
Paper Take-up
Solenoid
Paper Take-up Sensor On
Figure 2-27. Print Sequence (End)
Rev.
2-17
