Web admin interface
81
VGA2Ethernet User Guide
Note: In case firmware update fails you can restore the factory configuration as it is
explained in the following section (
“
Using Maintenance Controls
”
).
Using Maintenance Controls
On the Web admin interface, select Maintenance to perform operations such as
restoring the factory configuration, and rebooting or shutting down the device.
Figure 27.
Maintenance Options
Restoring the VGA2Ethernet Default Factory
Configuration
Select Restore beside Restore Factory Configuration to reset the Broadcasting and
Frame Grabber settings. The factory default configuration is the configuration that the
VGA2Ethernet device had when you received it from Epiphan. It can be useful to
return the VGA2Ethernet device to this configuration if you have made a number of
configuration changes that you want to reverse.
Restoring the factory configuration can also help with troubleshooting. If after making
a number of configuration changes you notice problems and you are not sure which
change is causing the problems, you can restore the Factory Configuration and start
over.