Mac OS X VGA2Ethernet user interface
53
VGA2Ethernet User Guide
Show/Hide Device
Information
Enable or disable displaying information about the
current Frame Grabber at the top of the VGA2Ethernet
user interface window. The display shows the hardware
type, location (IP Address), serial number, video mode,
frame rate and data rate of the device.
Show/Hide adjustment
Controls
Override image adjustments. When the VGA2Ethernet
user interface first starts, the application and the Frame
Grabber adjust the captured image for optimal
appearance. However, you may need to override these
image adjustment settings to improve the image quality.
Enter Full Screen
Scale the VGA2Ethernet user interface window to fill the
screen. Press Command-F to exit full screen mode.
Hide/Show Toolbar
Enable or disable displaying the toolbar at the top of the
VGA2Ethernet user interface.
Tools Menu
Use the commands on the Tools menu to show VGA Mode Information and to upload
or save an EDID file.
Show VGA Mode
Information
Display low level information about the Frame Grabber
VGA mode. When requested, you can use this
command and copy this information into an email to
send to Epiphan Support.
Upload EDID To Device
Upload an extended display identification file to the
device.
Read EDID From Device
Save a copy of the device extended display
identification file to the video capture workstation.
Other commands are not applicable to VGA2Ethernet