Web admin interface
65
VGA2Ethernet User Guide
Adding or Changing the Web admin Interface
Password
Initial factory settings are such that no password is set in the Web admin
interface. For security reasons, you should add a password to control access to
the administration interface functions. You can add a password or change the
password at any time.
Note: If you lose or forget the admin password you should contact your
reseller or Epiphan Technical Support for help to reset the device to factory
defaults.
To add a password to the Web admin interface
1.
Log into the Web admin interface.
2.
Select Admin Access.
3.
Enter and repeat the new password. The password is case sensitive and can
include up to 255 ASCII characters.
4.
Select Apply. The password changes and after a pause you are prompted to
log into the Web admin interface.
5.
Log into the Web admin interface with the admin user name and the new
password.
Figure 20.
Change Administrator’s Password
To delete the Web admin interface password