Web admin interface
62
VGA2Ethernet User Guide
and Time
.
Firmware
Upgrade
Upgrade the VGA2Ethernet firmware. See
Upgrading the
VGA2Ethernet Firmware
.
Maintenance
Reboot or shutdown the VGA2Ethernet device.
Restore factory configuration. See
Using Maintenance Controls
.
Start and stop frame grabber.
System
Description
Specify the VGA2Ethernet device’s name. It is displayed in a list of
available devices in Network Discovery Utility under this name.
Info
Display information about the VGA2Ethernet Firmware, CPU,
Frame Grabber and VGA Mode. See
Displaying VGA2Ethernet
Information
.
Configuring the Ethernet Bridge For Use if You Have
Only One Ethernet Connection
In some cases you may only have one network connection available for both the video
capture workstation and the VGA2Ethernet device. To record captured images and
still connect both the video capture workstation and the VGA2Ethernet device to the
network you can do the following:
1.
Log into the Web admin interface.
2.
In the Network section, select the Enable Ethernet Bridge checkbox.
3.
Scroll down the Web admin interface to the Reboot the system section and
select Reboot. Then select Continue.
It takes a few minutes for the device to reboot.
4.
Connect Eth 1 directly to the video capture workstation using a cross-over or
regular Ethernet cable.
5.
Connect Eth 2 to the network.