Recording
61
DVI Broadcaster DL User Guide
Figure 42 Configuring a CIFS Client
To configure the CIFS client:
1.
Select
CIFS Client
in the
Protocol
field.
2.
Enter the
Server port
if the CIFS server uses a non-standard port. If your
CIFS server uses standard ports you should not have to add any information
to this field. If your server uses non-standard ports or looks for a non-
standard port first, enter the port number in this field.
3.
Enter the
Server address
. This can be the numeric IP address or fully
qualified domain name of the CIFS server.
4.
Enter
Server share
. This is the CIFS share name or the name of the
Windows shared folder on the CIFS server.
5.
If required, enter the name of the CIFS
Domain
. The Domain can be a
Windows Domain or Work Group name.
6.
Enter the
Login
and
Password
required to authenticate with the CIFS server
to connect to the server share.
7.
Select the
Use temp file
check box to upload a temporary file. This prevents
you from using a file which is not fully uploaded yet. After the file is
uploaded, it is renamed to its original name.
8.
Select
Apply
.
The DVI Broadcaster DL will then attempt to connect to the CIFS server. To view
messages about whether the DVI Broadcaster DL is able to connect to the CIFS
server and the status of the connection, click
Show log of automatic file upload.
Summary of Contents for DVI Broadcaster DL
