Streaming
37
DVI Broadcaster DL User Guide
8.2.2
Using Epiphan’s Partners as CDN Providers For Streaming
Use this option if you need to perform streaming on a remote streaming server
other than
epiphan.tv
. Please contact CDN support to request the list of supported
audio codecs and perform the required setting in the control interface’s Stream
Setup section (see
Select Audio Format
).
To use this option:
1.
Select
RTSP Announce
from the drop-down list.
2.
Enter the host/server name. For example,
172.20.1.50
.
3.
Enter the number of port which is used for streaming to server. Usually for
RTSP streaming it is port 554.
4.
In the
Mount point
field enter the full path to locate an SDP file on server.
This path is provided by the CDN provider.
5.
The RTSP protocol uses UDP or TCP as transport layers. If your CDN service
requires TCP as a transport layer, select the
Use TCP for RTP stream
check
box.
6.
If necessary, enter the user and password information.
7.
Click
Apply
.
Figure 23 RTSP Announce Functionality
Summary of Contents for DVI Broadcaster DL
