epiphan DVI Broadcaster DL, User Manual

Page: 18 / 112

Getting Started
14
DVI Broadcaster DL User Guide
b. The EpiphanTouch app
c. From the network administrator
d. Using the Factory Default static IP address. Only if the steps in
section, Connecting Directly to the DVI Broadcaster DL, are
followed
3. Log in as the DVI Broadcaster DL’s administrator user
User Name:
admin
Password: configured password <return>, there is no factory default
password so unless a password has been configured, just hit <return>
The Web admin Interface opens.
4.5 Users Logging
The DVI Broadcaster DL comes with three pre-configured users which can log in the
control interface. The first is the administrator user, the user name is
admin. The
second is the operator user, the user name is operator . The third is the viewer user,
the user name is viewer . Each can be assigned a password but their user names
cannot be altered. It is not possible to create new user names.
Important : When you install firmware for the first time after purchasing the device,
no default passwords are set.
4.5.1
The Administrator User
The administrator user is granted rights to log into the DVI Broadcaster DL and
perform any of the following functions:
1.
Perform configuration changes to the DVI Broadcaster DL.
2.
Manage the current broadcast. This can include the starting or stopping of the
recording of the broadcast.
3.
Manage previously recorded broadcasts. Including the archiving of recordings.
4.
System monitoring. This would involve retrieving any system statuses and
retrieving the solid state memory status.
5.
Upgrading the System Firmware from Epiphan Support. New firmware is
released to fix known problems or to add new features.
6.
Perform network diagnostics.