Stream Setup
23
DVI Broadcaster DL User Guide
7
Stream Setup
When you log in to the control interface, in the Stream Setup section you can
configure the video codec and specify streaming settings for the input signal.
7.1
Select Video Codec
Before starting the video recording or broadcasting process, you have to specify the
video codec for encoding. It can be selected in the Stream Setup section of the
interface.
To select the video codec:
1.
Click the Stream Setup option.
2.
Click an arrow in the
Codec
field.
3.
Select the required codec from the drop-down list. The following values are
available for selection:
H.264
MPEG4
Motion JPEG
After you have specified required video and audio codecs (as described in this
section and in the
Select Audio Format
section), click the
Info
menu option of the
Web Admin interface to see available broadcasting formats for your settings and
obtain the IP addresses for the broadcast (refer to
Retrieving t
he Stream’s URL for
Broadcasting
).
Figure 9
Stream Settings
Summary of Contents for DVI Broadcaster DL
