Streaming
39
DVI Broadcaster DL User Guide
Figure 24 RTP/UDP Push Functionality
8.2.3.1
RTP/UDP Push streaming for the MPEG-TS file format
The Web interface allows you to set up the MPEG-TS stream using
MPEG-TS for
RTP/UDP Push and MPEG-TS for
UDP Push
options. These options are used, for
example, when you need to add a DVI Broadcaster DL’s stream to an IP TV or set-top
box’ playlist.
To use the RTP/UDP Push streaming, you must configure the following streaming
settings in the Web Admin interface:
Video codec
H.264
Audio codec
MP3 or AAC
Using the first of these options it is possible to configure RTP/UDP transporting for
the MPEG-TS stream.
To use this option:
1.
Select Publish Stream from the main menu.
2.
Select
using
MPEG-TS for
RTP/UDP Push
from the drop-down list.
3.
Enter a destination multicast IP address. At this target point the broadcast will
be viewed.
4.
Specify the number of the destination port where the broadcast will be
received.
5.
Click
Apply
.
Summary of Contents for DVI Broadcaster DL
