Streaming
40
DVI Broadcaster DL User Guide
Figure 25 MPEG-TS UDP Push Functionality
To view the stream you need a link: rtp://@ip:port (for example,
rtp://@226.63.45.23:6000).
To get the link for the stream, select the Info section of the Web admin interface
and view the Stream Info pane.
8.2.3.2
UDP Push streaming for the MPEG-TS file format
To configure UDP transporting for the MPEG-TS stream, select
using
MPEG-TS for
UDP Push
from the drop-down list.
To use the UDP Push streaming, you must configure the following streaming settings
in the Web Admin interface:
Video codec
H.264
Audio codec
MP3 or AAC
To use this option:
1.
Select Publish Stream from the main menu.
2.
Select
using
MPEG-TS for
UDP Push
from the drop-down list.
3.
Enter a destination multicast IP address. At this target point the broadcast
will be viewed.
4.
Specify the number of the destination port where the broadcast will be
received.
5.
Click
Apply
.
Summary of Contents for DVI Broadcaster DL
