epiphan DVI Broadcaster DL, User Manual

Page: 102 / 112

Configuring using a Third-Party Application
98
DVI Broadcaster DL User Guide
18.4 Keys for HTTP API Commands
This section lists and describes all of the keys that can be used in HTTP API
commands to view or change the DVI Broadcaster DL configuration. These keys are
broken into the following types:

Device Info Keys

Broadcasting Setup Keys

ASF Encoder Keys

RTP Unicast Keys
18.5 Device Info Keys
These keys are used for getting information about the device.
Table 19 Device Information Keys
Key Description
vendor
Name of a vendor. The value is always "Epiphan Systems
Inc.”
product name Name of a product.
firmware_version Firmware version.
mac_address MAC address.
18.6 Broadcasting Setup Keys
These keys are used for getting or setting the broadcasting setup.
Table 20 Broadcasting Setup Keys
Key Description
framesize Get or change the frame size in pixels, for example 1024
x 768. Use %20 for spaces.
htmlrefresh Get or change the Flash/MJPEG webpage page refresh
time in seconds. The range is 0 to inf (infinite). 0 means
that page will not refresh.
streamport Get or change the stream port number. The range is
1000 to 65535. You cannot use port 5557 because this
port is used for network discovery.