EP Equipment CPD30L1-B, Service Manual

Page: 134 / 235

REV. 05/2020
ELECTRICAL SYSTEM
9
122
9.9.3 Settings and Adjustments
9.9.3.1. Set Options
To set options proceed as follows and refer to Table
4-2:
1. Connect the Zapi Handset, refer to paragraph
9.9.1.1.
2. Press the ROLL up button (1, Fig0000-90005SM) and
the SET up button (5) at the same time to enter
the CONFIG MENU.
3. Press the ROLL down button (1) or the ROLL up
button (2) to find the SET OPTIONS display.
4. Press the ENTER button (3) to view the options.
5. Press the ROLL down (2) or the ROLL up button
(1) to find the option to be changed.
6. Press the SET up button (5) or the SET down but-
ton (6) until the desired value setting is reached.
The option is now set at the desired value.
7. Press the OUT button (4) to exit the options
，
Press the Enter button to confirm the exit.
Fig0000-90005SM
9.9.2 Testing Truck Operation
The Zapi Handset can be used to test certain truck
operations as follows:
1. Connect the Zapi Handset, refer to paragraph
9.9.1.1.
2. Press the ROLL up button (1, Fig0000-90005SM)
and the ENTER button (3) at the same time to
enter the MAIN MENU.
3. Press the ROLL down button (2) or the ROLL up
button (1) to find the TESTER display.
4. Press the ENTER button (3) to view the tests.
5. To verify various switch functions, locate the
switch on the display and then operate that funct-
ion to verify operation.
6. Press the OUT button (4) to exit the tests.